Fluxing (degassing) tubes
CGT Carbon delivers fluxing tubes for degassing inert gases or active gases. Fluxing the molten metal with nitrogen is a simple and inexpensive way to ensure that the metal is gas free and avoids gas porosity; reduces the number of pores and foggy phenomena on the surface of the metal.
We offer a wide range of graphite-gas inlet tubes for metal working. In these sectors, they find their application:
- Aluminum production
- Brass Manufacturing
- Precious metal manufacturing
Our gas inlet tubes offer excellent performance and a good service life. We also offer an additional machining of the pipes for gas thread, nozzles and blind holes.
The following table shows the typical types and sizes:
|Marke||Diameter in mm||Length in mm||Diameter in inch||Length in inch|
|CGFT-1||31,75/22,23||2740||OD 1.1/4 X ID 7/8||108|
|CGFT-2||38,10/25,40||2740||OD 1.1/2 X ID 1||108|
|CGFT-3||50,80/12,70||2740||OD 2 X ID ½||108|
|CGFT-4||50,80/12,70||2490||OD 2 X ID ½||98|
|CGFT-5||50,80/12,70||2130||OD 2 X ID ½||84|
|CGFT-6||50,80/12,70||1830||OD 2 X ID ½||72|
|CGFT-7||50,80/12,70||1700||OD 2 X ID 1/2||67|
|CGFT-8||50,80/12,70||2740||OD 2 X ID 1.1/2||108|
|CGFT-9||63,50/12,70||2490||OD 2.1/2 X ID 1/2||98|
|CGFT-10||76,20/19,05||2490||OD 3 X ID ¾||98|
|CGFT-11||76,20/19,05||2440||OD 3 X ID ¾||96|
|CGFT-12||76,20/19,05||1830||OD 3 X ID ¾||73|
|CGFT-13||76,20/19,05||1700||OD 3 X ID 3/4||67|
Different graphite materials are available for graphite Fluxing (Degassing) Tubes for different applications. Extruded, Recovery, Vibrated, Impregnated and Oxidation resistant graphite tubes are available. Our graphite Fluxing (Degassing) Tubes can be manufactured and selected graphite materials as per your requirements or working conditions.